Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Beaver Creek
If you live out here in Beaver Creek, you already know the weather does more to your chimney than your fireplace ever will. We’re Saddle Chimney Sweep, and we serve Beaver Creek and the surrounding Burleson County countryside with chimney sweeping, repair, and dryer vent cleaning. Our technicians have up to 14 years of experience, and we know the rural housing stock here: older ranch homes, manufactured homes, and short metal flues that were never built for heavy use. Call (844) 538-0969 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm.
Why Beaver Creek Homeowners Call Saddle Chimney Sweep for Chimney Sweep
Beaver Creek is a small community, and word travels. Homeowners here call us back because we show them what we find instead of telling them what they need. When we sweep a chimney, we run a camera and hand you the photos. If something needs repair, you see the reason before you spend a dollar on it. If it can safely wait, we tell you that too.
We bring repair capability to every sweep. That matters in a market where a “cleaning” call often turns into wildlife removal, a new cap, and crown repair. We install professional-grade materials from suppliers like Copperfield and DuraFlex, not hardware-store substitutes. When we find a problem, we can fix it. No second contractor needed.
Our name comes from the chimney itself. A saddle, or cricket, is the structure that keeps water from pooling against your stack. We chose that name because it’s the part of the trade most people never think about until a ceiling stain shows up. That’s the kind of thinking we bring to every Beaver Creek home we work on.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning in Beaver Creek
Chimney Cleaning in Beaver Creek usually means something different than it does in a city where people burn wood all winter. Most chimneys here sit idle through the long hot summer and only see occasional fires during mild winters, so the buildup you’re dealing with is more likely soot, leaf debris, and nesting material than heavy creosote. A typical chimney cleaning here runs $150 to $250. If we find debris blocking the flue or evidence of animal activity, the job can run $200 to $350 once removal is included. The written estimate sets the final price.
What a Sweep Actually Covers
We brush the flue, but we also check the firebox, damper, and smoke chamber, and we look at the cap and crown from the roofline. On older rural construction, that visual check is where the real problems turn up. A flue that looks clean from the hearth can still be missing a cap or hiding a cracked crown.
When to Book One
If your chimney sat uncapped through a full spring and summer of Brazos bottomland storms, book a sweep before your first fire of the season. That’s the window when nests, leaves, and wind-driven rain have had months to collect. Our chimney sweep team handles the cleaning and the inspection in one visit.
Fireplace Cleaning in Beaver Creek
Fireplace Cleaning in Beaver Creek is about the firebox itself: soot on the walls, ash buildup, a damper that sticks, and the smoke chamber above it. On the older masonry fireplaces common on ranch and farm homes here, the smoke chamber is often roughly built or has never been properly shaped, which is why some fireplaces smoke into the room no matter how good the wood is. A typical fireplace cleaning runs $120 to $200. When it’s paired with a full sweep, most homeowners land in the $180 to $320 range. The written estimate sets the final price.
Soot, Ash, and the Damper
Soot and ash come out with hand tools and a vacuum, but the damper gets a real check. A damper that won’t seal lets conditioned air escape all summer and lets storm-driven rain and humidity work its way up into the smoke chamber. We test it and tell you whether it needs adjustment or repair.
Smoke Backdraft on Short Flues
Many homes here have short metal flues added on, or thinly built masonry stacks that don’t draft well. If your fireplace puffs smoke when you first light it, that’s a draft problem, and brushing alone won’t fix it. We diagnose it and explain what correction actually makes sense for your setup.
Trusted Brands We Service in Beaver Creek
We work with professional-grade chimney products, the kind used by certified chimney professionals rather than big-box substitutes. For caps and liners, we install DuraFlex and Olympia Chimney components, and for masonry repair we use HeatShield and Gelco systems designed to resurface and restore a failing flue. We don’t claim a warehouse or parts stock, but we do order the right material for the job and get it to your home without a long wait. If your chimney needs a cap, a crown repair, or a relining after the inspection, those materials are what we’ll bring. You won’t be handed a list of brands to research on your own. We’ll show you what fits and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Beaver Creek Homes
- Uncapped flues full of nests and debris. Spring and fall storm lines drive rain and wind straight down an open pipe, and dirt daubers and birds move in over the off-season. A call that starts as a cleaning often turns into wildlife removal and a new cap.
- Cracked or spalled crowns. Occasional freezes in the Brazos bottomlands work on older masonry crowns, and the damage goes unnoticed until a ceiling stain appears. That’s usually the first sign a crown or flashing repair is overdue.
- Short, thinly built metal flues. Older ranch and manufactured homes often have add-on flues that don’t draft well and smoke backdraft into the room. A standard brushing never diagnoses this, which is why we look at the whole system.
- Failed flashing at the roofline. Storm wind lifts flashing, and water finds the seam. By the time it shows up inside, the repair has usually been needed for a season or more.
Pricing for Chimney Sweep in Beaver Creek, TX
We keep our pricing straightforward and put a range on paper before we start. A standard chimney sweep in Beaver Creek runs $150 to $250. A fireplace cleaning runs $120 to $200, and a combined sweep and fireplace cleaning most often lands between $180 and $320. Level 1 and Level 2 inspections range from $100 to $350 depending on what the camera work and roofline access involve. Creosote removal beyond a standard sweep, crown or flashing repair, and cap installation are quoted separately once we’ve seen the condition. Every estimate is free, and the written estimate sets the final price. We don’t build in surprises for storm damage or for a chimney we didn’t expect to find in rough shape. You get a number, and you decide from there.
We Also Serve Cities Near Beaver Creek
We serve homeowners throughout this part of Central Texas, including nearby Somerville, Snook, Caldwell, and College Station. If you’re in Beaver Creek or just outside it, we can put your chimney on the schedule. Call (844) 538-0969 and we’ll find a time that works. We answer 24/7. Fast dispatch, 7am-7pm.
Serving Beaver Creek, TX – Our Local Coverage Area
We serve Beaver Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Beaver Creek
A musty smell usually means moisture and organic debris, not creosote. An uncapped flue collects rain, leaves, and nesting material through the off-season, and that’s what you’re smelling. A sweep clears it out and a cap keeps it from coming back. Call (844) 538-0969 for an exact quote. Estimates are free.
Don’t light a fire, and don’t try to knock it down from below. A blocked flue pushes smoke and carbon monoxide back into the room. Leave it to a trained sweep, who can pull the debris safely and check for damage underneath. Call (844) 538-0969 and we can get it on the schedule.
Yes, some crown damage comes straight from storm wind and rain, and some comes from freeze-thaw on a crown that was already wearing thin. Either way, a crack lets water into the masonry every time it rains. We can repair it before it turns into a bigger leak. Call (844) 538-0969 for a free estimate.
It could be. In this area, a ceiling stain after a hard rain often traces back to failed flashing or a cracked crown at the roofline. It’s worth a look before the next storm line comes through, because a small gap only gets bigger. Call (844) 538-0969 and we’ll check it.
Yes, and especially in Beaver Creek, because the off-season is when a chimney collects the most debris and wildlife. An idle fireplace has had months of rain, leaves, and animal activity settle into it. A Level 1 inspection is a good starting point. Call (844) 538-0969 for pricing and to book one.
If your chimney sat through this year’s storms without a cap, this is the season to look at it, before the first fire and before water has another round to work its way in. We’re Saddle Chimney Sweep, and we handle cleaning, repair, and dryer vent cleaning under one company so you don’t need a second contractor when the inspection turns something up. Call (844) 538-0969 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm.
Written by the team at Saddle Chimney Sweep.