Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Bryan, TX
Saddle Chimney Sweep is a chimney company in Bryan, and our work here is shaped by the houses we walk into. Bryan’s mid-century brick ranches near downtown and around the A&M campus were built with fireboxes sized for occasional wood burning, and many now see year-round use that packs on creosote. Newer builds out in the 77807 and 77808 growth corridors bring factory-built fireplaces that need a different sweeping protocol. We handle the full system: sweeping, chimney repair, and dryer vent cleaning, with professional-grade materials from suppliers like Copperfield, DuraFlex, and HeatShield. For an exact quote on chimney repair in Bryan, call (844) 538-0969. Our technicians have up to 14 years of experience.
Why Bryan Homes Are Different
Bryan’s climate does something to a chimney that a lot of homeowners don’t expect. Summers are hot and humid, and the stack sits idle for months. Creosote that would normally stay soft hardens into a glazed, tar-like layer, and pests find an open flue a good place to nest. Then a hard freeze hits and the fireplace gets heavy use for a short stretch, which is exactly the pattern that produces stubborn glazed creosote and animal-blockage calls.
Housing stock splits the work in two. Post-WWII brick ranches with masonry fireplaces often have exterior chimneys and clay tile liners showing spalling after decades of heating-and-cooling cycles. Newer tract homes in the 77807 and 77808 corridors have factory-built metal fireplaces and flues that need their own approach. And in the older neighborhoods north and east of downtown, the expansive clay soil shifts enough that original clay flue tiles crack. A cracked tile shows up as a draft problem, and homeowners assume it’s just soot buildup. That’s why a sweep in Bryan often turns into troubleshooting before it turns into cleaning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Bryan Services
Two jobs make up most of the calls we get from Bryan homeowners, and both start with a look at what’s actually happening inside the flue.
Chimney Sweep in Bryan
A standard sweep here means more than running a brush. We inspect the firebox, damper, smoke chamber, and flue, then clean to the liner so we’re not pushing glazed creosote around. In Bryan’s older ranches, that inspection matters because a cracked clay tile can look like ordinary soot to a homeowner. In the newer corridors, factory-built fireplaces get their own cleaning protocol so the metal flue isn’t damaged. You get a camera inspection and photo report, so you see what we see. For the full rundown on scheduling a chimney sweep, that page covers the process from booking to cleanup.
Dryer Vent Cleaning in Bryan
Dryer vents are the overlooked half of home fire safety, and Bryan’s humid summers don’t help. Lint collects and holds moisture, which makes it pack tighter against the duct walls. Our dryer vent cleaning pulls the full lint load from the duct and the exterior termination, then checks that the run is clear and venting where it should. It’s a straightforward job that closes one of the most common gaps in a home’s fire-safety picture.
Chimney Repair in Bryan
Chimney repair in Bryan usually starts with something a homeowner can’t see: a draft that won’t draw, a stain on the ceiling near the stack, or a piece of clay tile that shifts under a brush. The cause is often the house itself. Clay flue tiles in the older brick ranches crack as the expansive clay soil moves, and decades of heating-and-cooling cycles leave exterior masonry spalling. Add Bryan’s idle-then-heavy-use pattern, and problems that start small get worse between cold snaps. We do Chimney Repair alongside sweeping so that when a sweep turns up a problem, we can diagnose it and fix it without sending you to a second contractor. Everything we install comes from professional-grade suppliers, never hardware-store substitutes.
Chimney Cap Installation
Signs you need it
A cap is missing, rusted through, or sized so poorly that rain and animals get into the flue.
What it costs in Bryan
Chimney cap installation in Bryan typically runs $250 to $650, depending on the flue size and the cap material.
How we do it
We measure the flue opening, set the cap on a proper mounting, seal it against water, and confirm the draft still pulls correctly.
Chimney Liner Installation
Signs you need it
The existing clay tiles are cracked, spalled, or missing mortar joints, or a new appliance needs a liner sized to it.
What it costs in Bryan
Chimney liner installation in Bryan typically ranges from $2,200 to $4,800, set by flue length and liner type.
How we do it
We clean and camera the flue, size the liner to the appliance, then install and insulate a DuraFlex or HeatShield system and verify the connection at top and bottom.
What Chimney Repair Costs in Bryan
These are typical ranges for the Bryan market. The written estimate you get after inspection sets the final price.
| Item | Typical range in Bryan |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $2,200 – $4,800 |
Can a cracked flue tile cause a draft problem in my Bryan home?
Yes. A cracked clay tile lets air leak into the flue, which throws off the draft and can pull smoke back into the room. It’s easy to mistake for soot buildup, which is why we camera the flue before recommending anything.
How do I know if my Bryan chimney needs repair or just a sweep?
You’ll know after inspection. If the flue, crown, or flashing is sound and the problem is creosote, a sweep handles it. If tiles are cracked or masonry is failing, repair comes first. Call (844) 538-0969 for a free estimate.
Brands We Service in Bryan
We install and work with professional-grade materials from names Bryan homeowners may already know: Copperfield, DuraFlex, HeatShield, and Gelco, plus Olympia Chimney and Famco. These are the products certified chimney pros use, not big-box substitutes. When a part has to be ordered, we’ll give you a realistic turnaround before we start. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Bryan, TX
Every figure here is a typical range, and the written estimate is what sets your final price.
| Service | Typical range in Bryan |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $2,200 – $4,800 |
Price climbs with flue length, liner type, and how much masonry repair the crown or flashing needs once we’re up there. What you won’t get is a surprise: you approve a flat, written price before we book the work, and nothing starts until you’ve agreed to it.
Neighborhoods We Serve in Bryan
We work all over Bryan, from the older brick ranches north and east of downtown to the newer subdivisions out toward the 77807 and 77808 corridors. The vintage of the house tells us a lot before we arrive, since a clay-tile masonry chimney and a factory-built metal flue need different tools and different inspections. Wherever you are in the city, the process is the same: camera inspection, photo report, and a written price you can see for yourself. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- Downtown Bryan and the surrounding historic blocks
- Neighborhoods near the A&M campus
- The 77807 growth corridor
- The 77808 corridor
Service Area – Cities Near Bryan
Bryan sits at the center of our primary service area, and we also work the towns around it. If you’re just up the road in College Station, TX, we cover you. Same for homeowners out at Lake Bryan, TX, or further north in Kurten, TX. South of town, we reach Snook, TX as well. Wherever you are in the area, the visit works the same way: a camera inspection, a photo report you keep, and an upfront price before any work begins.
Serving Bryan, TX – Our Local Coverage Area
We serve Bryan and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bryan
We book sweeps and estimates into the next available opening. Call (844) 538-0969 to schedule. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Some repairs, especially structural masonry work or a liner replacement, may require a permit. We’ll tell you what applies to your job and let you confirm with the city’s building department before work starts. Estimates are free.
All of Bryan, from downtown and the A&M-area neighborhoods to the 77807 and 77808 corridors. We also serve College Station, Lake Bryan, Kurten, and Snook. Call (844) 538-0969 for an exact quote on your address.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bryan Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Marisol Martinez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Andre Coleman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Marco Mendoza