Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in College Station?
In College Station, a stainless steel chimney liner install typically runs $2,400 to $5,800 depending on height, flue size and whether the existing clay tile needs removal. A partial chimney rebuild, where we replace the top few courses above the roofline, usually lands between $1,800 and $4,200. A full rebuild from the firebox up is a bigger job and can run $6,500 to $15,000 or more once scaffolding, materials and masonry labor are added.
Those are estimates for the local market in 2026. Every chimney is different, and the written estimate you get after we look at yours is what sets the final price. Estimates are free, so you’re not guessing before you know the scope.
Key Takeaways
- A professional stainless liner install in College Station is typically $2,400 to $5,800.
- Rebuilds are priced by how much masonry comes down and goes back up: a crown-and-top rebuild is the cheapest, a full rebuild the most expensive.
- College Station’s clay soils shift through the seasons, and that movement is hard on masonry chimneys over time.
- Our technicians have up to 14 years of experience, and we install professional-grade liners from DuraFlex and Olympia Chimney, not hardware-store substitutes.
- If a sweep turns up a cracked flue or failing mortar, we can fix it rather than hand you off to a second contractor.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the different pieces of this work price out in the College Station market. These are line-item estimates, not quotes; the written estimate is the number that counts.
| Work item | Typical cost range |
|---|---|
| Stainless steel flexible liner install (single-story chimney) | $2,400 – $4,200 |
| Stainless steel flexible liner install (two-story or tall chimney) | $3,600 – $5,800 |
| Rigid liner sections for a straight flue | $2,800 – $5,500 |
| Old clay tile liner removal (when the flue is broken or too narrow) | $900 – $2,200 |
| Insulation wrap around a new liner | $300 – $800 |
| New chimney cap and crown | $400 – $1,100 |
| Partial rebuild (top few courses above the roofline) | $1,800 – $4,200 |
| Rebuild of the section above the roofline, full height | $3,500 – $7,500 |
| Full chimney rebuild from the firebox up | $6,500 – $15,000+ |
What drives the cost up is mostly access and disassembly. A liner is priced by the linear foot of flue it has to fill, so a tall chimney with a straight shot is easier than a short one with two offsets. Rebuild costs climb with the amount of brick and mortar that has to come down and go back up, whether scaffolding is needed, and whether the flue liner is being replaced at the same time. The material matters too: a professional-grade liner from a supplier like DuraFlex or Olympia Chimney costs more than a thin generic insert, and it’s built to hold up to the heat and corrosive flue gases a wood fire produces.
Costs come down when the flue is straight and intact, when we can work from the roof without scaffolding, and when a rebuild is limited to the crown and cap rather than a full teardown.
What Affects Chimney Liner & Rebuild Pricing in College Station
- Clay soil movement. The heavy clay soils around College Station swell and shrink with moisture, and that settling works on masonry chimneys year after year. A chimney that’s leaning or has widening mortar joints may need more rebuild work than one that’s just worn at the top.
- Chimney height and flue size. Liner pricing is driven by the length of flue and its inside dimensions. A larger flue, or one with a bend, takes more material and more time to line than a straight, narrow one.
- Condition of the existing liner. A cracked or spalling clay tile liner usually has to be removed before a new stainless liner goes in. That removal step adds cost, but leaving a broken flue in place behind a new liner isn’t a safe shortcut.
- Roofline access. A chimney that’s tall, steeply pitched around, or hard to reach from the roof adds labor. Where scaffolding is required for a rebuild, expect the range to move toward the higher end.
- Materials and product grade. We install liners and repair materials from professional-grade suppliers such as DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. The product inside the flue is what stands between your home and the fire, so it’s not the place to cut corners.
- Whether the repair is bundled with a liner. When a rebuild and a liner install are done in the same visit, you save on the cost of mobilizing twice. If we find a problem during a sweep, we can often fold the repair into the same service visit.
Is a Chimney Liner Really Necessary in College Station?
Yes, if your chimney has an unlined or damaged flue. A clay tile flue that’s cracked or missing tiles lets heat, embers and carbon monoxide reach the wood framing around the chimney, and a stainless liner is what seals that off. In a wood-burning fireplace, the liner also improves draft and keeps creosote from building up against bare masonry, which is harder to clean and more prone to ignition. When we sweep a College Station chimney and find a compromised flue, the liner question usually comes up right away, and we can quote it on the spot instead of sending you to a second contractor.
Some homes already have a sound clay liner that just needs a sweep and a crown repair, and we’ll tell you that honestly when it’s the case. The liner only becomes necessary when the existing flue can’t safely contain the fire.
What Does a Chimney Rebuild Involve?
A chimney rebuild is masonry work: we take down the damaged brick and mortar, rebuild it with new materials, and finish with a proper crown and cap to keep water out. How much comes down depends on the damage. A common job is rebuilding the section that sits above the roofline, where weather and settling take the biggest toll. A full rebuild goes all the way down to the firebox and is reserved for chimneys with structural problems.
The saddle is the part of the chimney structure that sheds water away from the stack, and it’s exactly where we look first on a rebuild assessment. Water intrusion is what turns a small mortar problem into a full rebuild, so getting the crown, cap and saddle right is part of the job, not an add-on. If the flue also needs a new liner while the chimney is open, we install it before the brick goes back up.
How to Save on Chimney Liner & Rebuild
There’s no discount trick here, just smart sequencing. A few practical ways to keep the number down:
- Catch it early. A crown repair at the first sign of cracking is far cheaper than a rebuild that follows years of water getting in. Have the chimney inspected before the heating season, not after a problem shows up.
- Bundle the work. If you need a liner and a crown repair, or a rebuild and a new cap, doing them together saves on mobilization. Ask for one estimate covering the whole job.
- Get a written estimate before work starts. A clear, itemized estimate tells you what’s being replaced and why, so you’re not paying for guesswork.
- Keep up with sweeping. Regular sweeping removes creosote buildup that accelerates wear on the flue and reduces the chance a small issue becomes a rebuild. A sweep also catches liner damage while it’s still repairable.
- Consider the flue’s condition before you reline. Sometimes a HeatShield resurfacing restores a sound flue at a lower cost than a full stainless liner, and we’ll tell you when that’s an option.
Estimates are free. Call (844) 538-0969 to get a written number for your chimney. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Liner, Rebuild or Both: What Makes Sense for Your Chimney?
Not every chimney needs a rebuild, and not every rebuild needs a liner. The distinction matters because the two jobs are priced very differently. A liner addresses the inside of the flue: it’s the fire-containment piece. A rebuild addresses the structure around it: the brick, mortar, crown and cap. When the masonry is failing but the flue is sound, a rebuild with a crown repair may be all you need. When the masonry is fine but the clay liner is cracked, a stainless liner solves the problem without touching the brick.
When both are worn, doing them together is usually the most economical path, because the masonry is already open and the liner can go in before the brick goes back up. We look at both on every assessment so you know which one your chimney actually needs. If you’re unsure which category you’re in, a sweep and inspection is the place to start.
Why Professional-Grade Materials Matter
The liner is the part of the chimney you never see after it’s installed, which makes the grade of the material easy to overlook. A thin, generic liner can fail early under the heat cycling a wood fire produces, and a failed liner means the work has to be done again. We supply and install liners and repair products from established suppliers like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield because those materials are built for the job. We source from chimney-industry suppliers, not the hardware aisle.
That’s also why we treat the repair as part of the same service relationship as the sweep. When we find a failing flue during a cleaning, we can diagnose it and resolve it without sending you shopping for a second contractor.
Dryer Vent Cleaning: The Other Fire-Safety Job
Your fireplace and flue aren’t the only vent in the house that can clog and create a fire risk. The dryer vent is one of the most overlooked fire hazards in a home, and it’s part of the same fire-safety picture we handle. Lint builds up in the duct over time and restricts airflow, which is a problem most homeowners don’t think about until the dryer stops drying well. We clean dryer vents alongside our chimney work, so one visit can cover both. It’s a small line item compared to a liner or a rebuild, and it protects a hazard that’s easy to forget.
Frequently Asked Questions About Chimney Liner & Rebuild Cost
How much does a chimney liner cost in College Station?
A stainless steel chimney liner install in College Station typically costs $2,400 to $5,800, with a single-story straight flue landing near the middle of that range and a taller or offset flue toward the top. Old clay liner removal, if needed, adds $900 to $2,200. Call (844) 538-0969 for an exact quote; estimates are free.
How much does a chimney rebuild cost in College Station?
A partial rebuild of the top of the chimney runs $1,800 to $4,200, a full-height rebuild above the roofline runs $3,500 to $7,500, and a complete rebuild from the firebox up starts around $6,500 and can reach $15,000 or more. The written estimate sets the final price. Call (844) 538-0969 to get yours.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper than a full rebuild when the damage is limited to the crown, cap or the top few courses of brick. A $400 to $1,100 crown and cap repair can protect a chimney that would otherwise need a $6,500 rebuild later. Call (844) 538-0969 and we’ll tell you which side of that line your chimney is on.
Can you install a liner the same day?
Yes, a standard liner install is usually a same-day job when the flue is accessible and the old liner doesn’t need extensive removal. Jobs that involve clay tile removal or a rebuild combined with the liner may take longer. Call (844) 538-0969 to schedule, and we’ll give you a realistic timeline with the estimate.
Do I need a permit for a chimney liner or rebuild in College Station?
Most cities require a permit for a structural rebuild or a change to the chimney structure, so ask College Station’s building department about your specific job before work starts. A liner install alone sometimes doesn’t require one, but it’s worth confirming. We’ll walk you through what we know and help you plan. Call (844) 538-0969 with questions.
Book a Free Estimate
If your chimney needs a liner, a rebuild or a repair, the first step is a look at the actual condition of the flue and masonry. We handle sweeping, repair and dryer vent cleaning under one roof, and we install professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. When we find a problem, we can fix it. Straightforward assessment, honest repair options, and a written estimate that sets the final price.
Call (844) 538-0969 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you’d like to know more about how we work, start with Saddle Chimney Sweep and see what we cover in College Station.
Pricing reflects the College Station market as of 2026. Saddle Chimney Sweep offers free estimates – call (844) 538-0969.
Written by the team at Saddle Chimney Sweep.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kelly Meyer"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Kurt Mercer"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Marco Mendoza