Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Navasota
If you burn wood in Navasota, your chimney has been sitting idle through months of Gulf Coast humidity and is about to earn its keep again. We handle chimney sweep work throughout Navasota and the surrounding Brazos Valley, from the older bungalows and farmhouses near the 77868 core out to the ranch and manufactured homes on the outskirts. Local expertise matters here because the housing stock isn’t uniform: a 1920s masonry fireplace that’s been retrofitted with an insert and a factory-built metal chimney on a newer home need completely different brushes, inspection methods, and repair conversations. Call (844) 538-0969 to book a sweep before the first cold front. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Navasota Homeowners Call Saddle Chimney Sweep for Chimney Sweep
We’ve built a strong local reputation in Navasota by showing people what we find rather than telling them what they need. Every sweep comes with a camera inspection and a photo report, so when we say a clay tile liner is cracked, you can see the crack yourself instead of taking our word for it. Our technicians have up to 14 years of experience, and that matters on old farmhouse chimneys where the flue doesn’t match any modern spec guide.
Response time to Navasota is a real advantage. We dispatch from 7am to 7pm, Sunday through Friday, so a call about a sticking damper or a smoky firebox usually gets a technician out same-day. When we find a problem during a sweep, we can fix it – relining, cap replacement, crown repair – so you’re not handed a referral and told to start over with a second contractor. And we install professional-grade materials from names like HeatShield, Olympia Chimney, and Copperfield, not hardware-store substitutes. That’s the whole point of working with one accountable specialist from the firebox to the dryer vent.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Navasota
Chimney Services in Navasota start with understanding what’s actually in your flue, and that begins with a sweep and a Level 1 or Level 2 inspection depending on what we find. A typical sweep runs $180 to $340, and a Level 2 inspection with camera work generally lands between $250 and $450. If the inspection turns up cracked tiles, creosote glazing, or a cap that’s rusting through, we quote the repair on the spot rather than scheduling a second visit.
Annual Sweep and Creosote Removal
Once a year is the baseline for a wood-burning fireplace, and heavier if you’re burning damp hardwood through cold snaps. We brush the flue, clear soot from the smoke chamber and firebox, and pull the creosote that a standard brush can reach. If the glaze has gone hard and shiny, we’ll tell you it needs chemical treatment rather than pretend a brush will do it.
Level 1 and Level 2 Inspections
A Level 1 covers what’s visible without special tools and suits a chimney with no known problems. A Level 2 adds a camera run through the flue, and in Navasota that’s the inspection that actually earns its money – it’s how hidden tile cracks get found before they become a fire risk.
Chimney Sweep Certified in Navasota
Chimney Sweep Certified in Navasota means the person on your roof knows masonry flues, factory-built metal chimneys, and the difference between them. Our technicians have up to 14 years of experience, and certification matters most on the older properties around the 77868 core, where flues were built to no guide anyone still has. A certified sweep reads the chimney in front of them, not a template. Sweeping and inspection typically run $180 to $450 depending on level, and the written estimate sets the final price.
Camera Inspection and Photo Report
Every sweep includes a camera run and photos you keep. If we recommend work, the evidence comes with it, and if the chimney can safely wait another season, we say so. That’s the part people actually want to hear.
Repair Capability Under One Roof
When the inspection finds a problem, we can fix it in the same relationship. That covers relining with HeatShield or stainless from Olympia Chimney, cap and flashing replacement, and crown work on older masonry. No second contractor, no re-explaining your chimney to a stranger.
Trusted Brands We Service in Navasota
The materials matter as much as the sweep. We install professional-grade components from HeatShield, Olympia Chimney, Copperfield, and Famco – the same class of product certified chimney pros rely on, not the thin galvanized caps and generic liners sold at big-box stores. We don’t claim to stock parts on a truck, but our supplier relationships mean repair materials get sourced and installed quickly, so a relining conversation doesn’t stall for weeks while your fireplace sits cold. Same goes for caps and flashing: the right stainless component outlasts the cheap version by a wide margin, and we’ll show you the difference before you decide.
Common Chimney Sweep Problems We See in Navasota Homes
- Clay tile liners cracked by soil movement. Brazos Valley clay shifts with wet-dry cycles, and the decades-old tile in early-1900s bungalows cracks along with it. A swept-clean flue can hide a fractured liner that only a camera inspection reveals.
- Third-degree creosote glaze. Damp hardwood burned slow through short winters leaves hard, shiny tar that a standard brush can’t touch. It needs chemical treatment before it becomes fuel for a chimney fire.
- Rusted galvanized caps and flashing. Gulf Coast humidity eats through cheap galvanized components, and water then finds the smoke chamber and crown. Stainless caps and flashing are the fix that lasts.
- Factory-built metal chimneys on the outskirts. Ranch and manufactured homes often have metal chimneys that need a poly brush sized to their own flue, not masonry tooling. Using the wrong brush can damage the liner.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Navasota, TX
A typical chimney sweep in Navasota runs $180 to $340, and a Level 2 inspection with camera work adds roughly $250 to $450 depending on flue complexity. Creosote removal beyond a standard brush-and-vacuum sits in that same range. Relining is the larger conversation: a HeatShield resurfacing or stainless liner typically runs $1,800 to $4,500 based on flue length and diameter. Caps and flashing replacement generally lands between $250 and $650 for stainless. These are typical estimates, not quotes – the written estimate sets the final price. The estimate itself is free, and nothing is recommended without camera evidence you can see. Call (844) 538-0969 for an exact quote.
We Also Serve Cities Near Navasota
We also serve homeowners in the communities around Navasota – College Station, Iola, Snook, and Beaver Creek. If you’re just outside the Navasota city limits, that’s still our territory, and the same camera inspection and honest assessment apply. Call (844) 538-0969 and we’ll confirm coverage for your address when you book.
Serving Navasota, TX – Our Local Coverage Area
We serve Navasota and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Navasota
Because the clay tile liners in old Navasota bungalows crack from decades of Brazos Valley clay-soil shifting, and a camera inspection finds it. What starts as a pre-cold-front sweep regularly becomes a HeatShield or stainless relining conversation. Call (844) 538-0969 for an exact quote – estimates are free.
Yes, in most cases. Gulf Coast humidity rusts galvanized caps and flashing through in a fraction of the time stainless lasts, and once rust opens a gap, water reaches the smoke chamber and crown. Stainless is the fix. Call (844) 538-0969 to book an inspection and price it out.
Once a year, inspected before the season starts. Months of humid idle time followed by heavy cold-snap use is exactly the pattern that builds creosote and lets moisture work on masonry between seasons. Call (844) 538-0969 to book your annual sweep.
First-degree creosote is light soot and flake a brush removes. Third-degree is hard, shiny tar glaze that a brush can’t touch and needs chemical treatment – the common result of damp hardwood burned slow through short winters. Call (844) 538-0969 and we’ll tell you which you have.
Yes. A factory-built metal chimney needs a poly brush sized to its own flue rather than masonry tooling, and the inspection method differs too. Using the wrong brush can damage the liner. Call (844) 538-0969 and we’ll send the right setup.
Book Your Navasota Chimney Sweep Today
Don’t let another humid summer pass with an uninspected flue. Whether you’re in an early-1900s bungalow near the 77868 core or a ranch home on the outskirts, we’ll run the camera, show you what we find, and tell you honestly what can wait. Call (844) 538-0969 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Saddle Chimney Sweep.